3 Wall Mount Installation
3.1 Component Installation
Wall mount bracket is shown as below. See Figure 3-1.
3.2 Installation
3.2.1 Installation Requirements
The wall mount speed dome can be installed on a hard surface wall. Before the installation,
please make sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 8x weight of the speed dome, bracket and the
accessories.
3.2.2 Installation Steps
Step 1
See Figure 3-2. Please draw four holes position in the wall according to the hole of the
bottom of the wall mount bracket. Use four hex bolts and flat washer to fix the bracket in
the expansion bolts.
Figure 3-1
7