Suzuki RV50 Service Manual page 34

Oil reservoir plate
10. Engine oil pipe
When the engine assembly is completed, the oil
passages have to be filled with oil. If the engine is
started and kept on running in this condition, the
engine may suffer lack of lubrication causing bear­
ing failure or piston seizure.
necessary to fill the pipe with engine oil and bleed
out all air.
1) Slacken the bolt or screw shown in the fi
expel air in the oil pipe from the oil tank.
2) When the air bubbles have disappeared, screw in
the bolt or screw securely.
3) Loosen the screws located on the engine oil
4) Supply the specified engine oil to the outlets
CD Oil filler
Therefore, it is
11. Kick starter shaft return spring
1) Turn the kick starter shaft clockwise all the way.
2) Insert one end of the spring into the hole on
the right crankcase and insert the others end
re to
gu
into the hole on the starter shaft with the
spring twisted half a turn, using a pliers.
CD Pliers ;'.z.; Kick starter return spring
outlet union bolts.
with a oil filler as shown in the figure.
33