Arctic Cat VLX 70002017 Service Manual page 83

XR302
23. Place the left-side footwell and foot peg in position
on the frame; then secure with existing hardware.
Tighten securely.
24. Install the front body panel with existing hardware.
25. Install the storage compartment box, storage com-
partment cover assembly, steering post cover, and
radiator access cover; then install the instrument pod.
82
26. Install the side panels into position.
27. Place the battery into position in the battery compart-
ment; then install the battery cables (positive cable
first). Secure with the battery cover.
CAUTION
Battery acid is harmful if it contacts eyes, skin, or cloth-
ing. Care must be taken whenever handling a battery.
28. Add proper amounts of engine/transmission oil and
coolant.
29. Install the seat.
CAUTION
If the engine had a major overhaul or if any major part
was replaced, proper engine break-in procedures must
be followed (see General Information). If the proper
engine break-in procedures are not followed, severe
engine damage may result.