Arctic Cat VLX 70002017 Service Manual page 36

10. Remove the spark plug cap from the spark plug; then
disconnect the primary connector (A) from the igni-
tion coil.
CF675A
11. Loosen the clamp securing the throttle body intake
duct to the air filter housing. Disconnect the crank-
case vent hose from the air filter housing; then
remove the air filter housing.
CD786
CD787
12. Remove the fuel hose connector from the fuel rail.
CF730A
13. Disconnect the connectors from the TPS, ISC valve,
fuel injector, and MAP sensor. Loosen the intake
boot clamp; then move the throttle body out of the
way.
XR298A
14. Remove the clamp securing the cooling duct boot to
the V-belt housing; then remove the cooling duct
boot from the V-belt housing outlet.
CF731A
XR299A
15. Remove the left-side foot peg and footwell (see
Steering/Body/Controls).
16. Remove the E-clip securing the shift rod to the
engine shift arm; then allow the shift rod to swing
forward and hang straight down from the shift lever.
Account for the washer located behind the E-clip and
the bushing behind the shift rod.
35