Arctic Cat VLX 70002017 Service Manual page 58

CD139
H2-045
4. In order on the crankshaft, install a washer, ring gear,
key, and the magneto rotor. Secure with the nut.
Tighten to 107 ft-lb.
CD948A
CD940B
5. Install the thrust washer and shift cam plate onto the
shift cam shaft; then coat the cap screw threads with
red Loctite #271 and tighten to 8 ft-lb.
PR433A
CD934
6. Install the shift cam stopper, spring, and two washers
(thick washer closest to the nut); then coat the
threads on the mounting stud with red Loctite #271
and install the nut. Tighten to 8 ft-lb.
PR434A
NOTE: Rotate the shift cam plate to ensure it ratch-

ets with no binding.
7. Install the shift shaft with two washers making sure
to align the timing mark on the shift shaft with the
mark on the shift cam plate.
57