Arctic Cat VLX 70002017 Service Manual page 17

FI464A
5. Remove the cap screws and lock nuts securing the
front rack to the frame; then remove the front rack.
Account for the grommets and bushings.
FI469A
6. Remove the side panels by pulling on them to release
the tabs from the body; then remove the screws
securing the rear of the front panel to the frame.
CF237A
FI470A
16
7. Remove the left and right footwells; then remove the
shift knob. Remove the shift lever pivot axle nut and
remove the axle and shift lever. Account for a spring
and two O-rings.
CD779
CD780A
8. Disconnect four headlight connectors and secure the
wires out of the way; then disconnect the wires to the
front accessory plug.
CD681
9. Rotate the handlebar to the full-left position; then lift
and slide the panel to the rear and lift the rear up to
clear the handlebar.