Displaying Bgp Statistics; Related Topics; Default Settings - Cisco Nexus 7000 Series Configuration Manual

Displaying BGP Statistics

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Command
show {ip | ipv6} bgp options
show {ip | ipv6} mbgp options
show running-configuration bgp
Displaying BGP Statistics
To display BGP statistics, use the following commands:
Command
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] flap-statistics
[vrf vrf-name]
show bgp sessions [vrf vrf-name]
show bgp sessions [vrf vrf-name]
show bgp statistics

Related Topics

The following topics can give more information on BGP:
•
•

Default Settings

Table 11-1
Table 11-1
Parameters
BGP feature
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
11-44
Chapter 10, "Configuring Basic BGP"
Chapter 16, "Configuring Route Policy Manager"
lists the default settings for BGP parameters.
Default BGP Parameters
Chapter 11
Purpose
Displays the BGP status and configuration
information. This command has multiple options.
See the Cisco Nexus 7000 Series NX-OS Unicast
Routing Command Referencefor more
information.
Displays the BGP status and configuration
information. This command has multiple options.
See the Cisco Nexus 7000 Series NX-OS Unicast
Routing Command Referencefor more
information.
Displays the current running BGP configuration.
Purpose
Displays the BGP route flap statistics. Use the clear bgp
flap-statistics command to clear these statistics.
Displays the BGP sessions for all peers. Use the clear
bgp sessions command to clear these statistics.
Displays the BGP sessions for all peers. Use the clear
bgp sessions command to clear these statistics.
Displays the BGP statistics.
Default
disabled
Configuring Advanced BGP
OL-20002-02