Configuring A Graceful Restart - Cisco Nexus 7000 Series Configuration Manual

Nx-os unicast routing configuration
Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Configuring IS-IS
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Command
Step 4
redistribute maximum-prefix max
[ threshold ] [warning-only | withdraw
[ num-retries timeout ]]
Example:
switch(config-router)# redistribute
maximum-prefix 1000 75 warning-only
Step 5
show running-config isis
Example:
switch(config-router)# show
running-config isis
Step 6
copy running-config startup-config
Example:
switch(config-router)# copy
running-config startup-config
The following example shows how to limit the number of redistributed routes into IS-IS:
switch# config t
switch(config)# router eigrp isis Enterprise
switch(config-router)# redistribute bgp route-map FilterExternalBGP
switch(config-router)# redistribute maximum-prefix 1000 75

Configuring a Graceful Restart

You can configure a graceful restart for IS-IS.
BEFORE YOU BEGIN
Ensure that you have enabled the IS-IS feature (see the
page
Create the VDCs and VRFs.
Ensure that you are in the correct VDC (or use the switchto vdc command).
SUMMARY STEPS
1.
2.
3.
4.
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
9-22
9-7).
config t
router isis instance-tag
graceful-restart
graceful-restart t3 manual time
Purpose
Specifies a maximum number of prefixes that IS-IS
will distribute. The range is from 0 to 65536.
Optionally specifies the following:
threshold—Percent of maximum prefixes that will
trigger a warning message.
warning-only—Logs an warning message when
the maximum number of prefixes is exceeded.
withdraw—Withdraws all redistributed routes.
Optionally tries to retrieve the redistributed
routes. The num-retries range is from 1 to 12. The
timeout is 60 to 600 seconds. The default is 300
seconds. Use clear isis redistribution if all routes
are withdrawn.
(Optional) Displays the IS-IS configuration.
(Optional) Saves this configuration change.
"Enabling the IS-IS Feature" section on
Chapter 9
Configuring IS-IS
OL-20002-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents