Configuring Time Intervals For Advertisement Packets - Cisco Nexus 7000 Series Configuration Manual

Chapter 20 Configuring VRRP
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
DETAILED STEPS
Command
Step 1
config t
Example:
switch# config t
switch(config)#
Step 2
interface interface-type slot/port
Example:
switch(config)# interface ethernet 2/1
switch(config-if)#
Step 3
vrrp number
Example:
switch(config-if)# vrrp 250
switch(config-if-vrrp)#
Step 4
shutdown
Example:
switch(config-if-vrrp)# shutdown
switch(config-if-vrrp)#
Step 5
authentication text password
Example:
switch(config-if-vrrp)# authentication md5
prd555oln47espn0 spi 0x0
Step 6
no shutdown
Example:
switch(config-if-vrrp)# no shutdown
switch(config-if-vrrp)#
Step 7
show vrrp
Example:
switch(config-if-vrrp)# show vrrp
Step 8
copy running-config startup-config
Example:
switch(config-if-vrrp)# copy
running-config startup-config

Configuring Time Intervals for Advertisement Packets

You can configure the time intervals for advertisement packets.
BEFORE YOU BEGIN
Ensure that you have enabled the VRRP feature (see the
OL-20002-02
Purpose
Enters configuration mode.
Enters interface configuration mode.
Creates a virtual router group.
Disables the VRRP group. Disabled by default.
Assigns the simple text authentication option and
specifies the keyname password. The keyname
range is from 1 to 255 characters. We recommend
that you use at least 16 characters. The text
password is up to eight alphanumeric characters.
Enables the VRRP group. Disabled by default.
(Optional) Displays a summary of VRRP
information.
(Optional) Saves this configuration change.
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
"Configuring VRRP" section on page
Configuring VRRP
20-7).
20-13