Shutting Down Is-Is; Configuring Is-Is On An Interface - Cisco Nexus 7000 Series Configuration Manual

Chapter 9 Configuring IS-IS
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Command
restart isis instance-tag
Example:
switch(config)# restart isis Enterprise

Shutting Down IS-IS

You can shut down the IS-IS instance. This disables this IS-IS instance and retains the configuration.
To shut down the IS-IS instance, use the following command in router configuration mode:
Command
shutdown
Example:
switch(config-router)# shutdown

Configuring IS-IS on an Interface

You can add an interface to an IS-IS instance.
BEFORE YOU BEGIN
Ensure that you have enabled the IS-IS feature (see the
page
Ensure that you are in the correct VDC (or use the switchto vdc command).
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
OL-20002-02
9-7).
config t
interface interface-type slot/port
medium { broadcast | p2p} (Optional)
ip router isis instance-tag
show isis [vrf vrf-name] [instance-tag] interface [interface-type slot/port]
copy running-config startup-config
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
Purpose
Restarts the IS-IS instance and removes all
neighbors.
Purpose
Disables the IS-IS instance.
"Enabling the IS-IS Feature" section on
Configuring IS-IS
9-11