Operation
DCS
DCS is a digital extension of CTCSS.
It provides 104 extra, digitally coded,
squelch codes that follow after the 38
CTCSS codes. CTCSS 1-38, followed by
DCS 1-104.
Follow the steps for changing CTCSS
code but select DCS code as desired.
Channels 05 and 35 are used for emergency channels. CTCSS
and DCS will not operate on these two channels.
NOTE
VOX
VOX is the automatic transmitting function without pressing the PTT key.
VOX appears when VOX level setting is from 1 to 5.
1. Press [MENU/MEM] 10 times.
VOX setting flashes.
2. Press
or
to select the desired setting.
The 6 VOX levels are from 1 (low sensitivity)
to 5 (high sensitivity) and Off.
3. Press & hold [MENU/MEM] to save and exit.
UNIDEN UH835S/UH850S
24
Handheld UHF-CB Transceiver