Controller Mode - Ubiquiti UniFi User Manual

Appendix C: UniFi Mobile App
WLAN Settings
• Same as 2G? Tap to use the same settings as the
2.4 GHz configuration.
Name/SSID
• Enter the name of the wireless network.
• Enabled Enable or disable wireless functionality.
• Security Select the security method you want to use.
• Security Key Enter the passphrase.
Apply Settings
• Tap to save your changes.
Settings
The Settings screen offers the following options:
• Secure Shell (SSH) Login Username
username of the device login.
SSH Login Password
• Change the password of the
device login.
• Country Code Change the country selection.
• Single Sign-On (SSO) Username
of the SSO account.
SSO Password
• Change the password of the SSO
account.
• Automatic Configuration Backup
automatic backup of the current configuration.
• Back Up Now Back up the current configuration.
128
Change the
Change the username
Enable or disable
• Restore Restore the previously saved configuration.
• Change mode Select this option if you want to change
to Controller mode. Go to the Controller Mode section in
the next column.
Note: For advanced configuration, switch to

Controller mode.

Controller Mode
You can access the UniFi Controller through the UniFi
mobile app.
Requirements
• An Ethernet connection from the UniFi device to the
LAN with DHCP
• Firmware version 3.4.4.3231 or higher
• A compatible Android or iOS device
1. Download the UniFi App from the App Store (iOS) or
Google Play (Android).
2. Select the functionality you want to use:
Controller mode
• Use the app to access the UniFi
Controller. Go to step 3.
• I don't have a controller
provision a UniFi AP for basic functionality without
configuring a UniFi Controller. Go to "Basic Setup"
on page 125.
UniFi Controller User Guide
Use the app to manually
Ubiquiti Networks, Inc.