Wired Client - History; Wired Client - Configuration - Ubiquiti UniFi User Manual

Chapter 14: Client Details
Deep Packet Inspection
The Deep Packet Inspection information is available if the
DPI feature is enabled (refer to "Settings > Site" on page
20 for more information).
(sort) You can click any column to sort the displayed list.
The selected column displays or to indicate ascending
or descending order.
Application Displays the name of the application.
Packets Displays the amount of data uploaded and
downloaded as packets.
Bytes
Displays the amount of data uploaded and
downloaded as bytes.
Wired Client – History
Date/Time Displays the date and time of the connection.
Duration
Displays the duration of the connection.
Down Displays the total amount of data downloaded by
the client.
Up Displays the total amount of data uploaded by
the client.
112
Wired Client – Configuration
Config
Alias Allows you to change the hostname of the client.
Note Allows you to enter comments about the client.
Once saved, the client will be designated as a "Noted"
client on the Insights > Known Clients tab.
User Group Allows you to assign the client to a User
Group. User Groups are set up under the Settings tab >
User Groups option (see "Settings > User Groups" on
page 34 for more information). The default User Group
is Automatic.
Save Click Save to apply changes.
IP Config
Fixed IP
Select this option to assign a static IP address to
the client, and configure the settings below. If you want
the local DHCP server to assign an IP address to the client,
remove the checkmark.
• Network Select the appropriate network from the
drop-down list.
• IP Address Enter the local IP address.
Apply Click Apply to save changes.
UniFi Controller User Guide
Ubiquiti Networks, Inc.