Before Using Your Refrigerator; Cleaning Your Refrigerator; Plugging It In; Using Your Refrigerator - Whirlpool ET14HJXDN00 Use And Care Manual

Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it,
connect it to a power source, install it and level it.
Cleaning your refrigerator
Removing packaging materials
Remove tape and any inside labels (except
NOTE: Do not remove any permanent
the model and serial number label) before
instruction labels inside your refrigerator. Do
using the refrigerator.
not remove the Tech Sheet fastened under
To remove any remaining glue:
the refrigerator at the front.
l
Rub briskly with your thumb to make a ball,
Cleaning it before use
then remove.
OR
l
Soak area with liquid hand-dishwashing
detergent before removing glue as de-
scribed above. Do not use sharp instru-
ments, rubbing alcohol, flammable fluids or
abrasive cleaners. These can damage the
material. See "Important Safety Instruc-
tions" on page 3.
After removing all packaging
materials, clean your refrig-
erator before using it, if
necessary. See cleaning
instructions on pages 14
and 15.
Plugging it in
Recommended Grounding Method
A 115 Volt, 60 Hz., AC onfy 15 or 20 ampere
fused and properly grounded elect&al
supply is required. It is recommended that a
separate circuit serving only this appliance
be provided. Use a receptacle which cannot
be turned off with a switch or pull chain. Do
not use an extension cord.
See Electrical Requirements and Ground-
ing Instructions Sheet in your Literature
Package.
&prong grounding
type wall receptacle
grounding plug
6