Pre-Dial; Mutiple Line Dial-Up; Call Hold; Call Transfer - ATCOM CT1X User Manual

CT1X IP Phone User Manual
1. Press "Menu" key to enter the menu and choose "History" option, then select one of call
history entry, and press "Dial" soft key or pickup the handset to call this number.
2. Pickup the headset, press "History" soft key, then select one of call history entry, and
press "Dial" soft key to call this number.

3.3. Pre-dial

It's a method to dial a phone number immediacy at standby mode.
The method is as below：
A. Dial-up the phone number at standby mode
B. Press soft key "Dial" or Press
3.4. Multiple line dial-up
CT1X supports up to 8 concurrent calls. If there is a new incoming call when you're talking on
CT1X, the new incoming call will be displayed on LCD and status indicator LED will be fast
blinking. User can press soft key "Hold" then press "Answer" to receive the new incoming call.

3.5. Call Hold

The current calling will be hold by pressing soft key "Hold" ,and the held call will be resumed
after pressing soft key "Resume". Even on 3-way conference calling, the conference will be
held after pressing "Hold" key, and be resumed to 3-way conference after pressing "Hold"
Key again. Remember the conversation is still on hold without being ended even if hung up
under the status of hold.

3.6. Call Transfer

1. Attended call transfer
The attended transfer allows user to call a third-party before transferring the calling.
ATCOM TECHNOLOGY CO., LIMITE
to send out the number.
www.atcom.cn
20