Macintosh Computer; The Computer - Canon CanoScan N650U Getting Started

Installation Procedures
• Install the software first before connecting the scanner to the

Macintosh computer.

○ ○ ○
1. Please have the CanoScan Setup Utility CD-ROM
handy.
○ ○ ○
2. Make sure that the scanner is not connected to

the computer.

The software should be installed without the scanner being connected
to the computer.
○ ○ ○
3. Turn on the computer.
○ ○ ○
4. Place the CanoScan Setup Utility CD-ROM in the
computer drive.
The language selection window will display to allow you to select a
language. Then the CanoScan Setup Utility will start and display the
menu window.
If the CanoScan Setup Utility menu window does not display, double-
click the CD-ROM icon, then the [Setup] icon.
34
N650U/N656U/N1220U Getting Started
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Menu Window
○
○
○
○