Connecting To The Computer - Canon CanoScan N650U Getting Started

1. Connecting to the Computer

With the Windows platform, the first step is to connect the scanner to the
computer. Please position the scanner in a safe and stable location as described in
Setup and Operating Conditions (p. 9).
○ ○ ○
1. Confirm that the power switches for the computer
and other connected devices are off.
If the power is on, shut down the computer and peripheral devices in
that order.
○ ○ ○
2. Confirm that the scanning unit has been unlocked
(p. 13).
• Make sure to unlock the scanner before plugging the USB cable
into the computer's USB port. If left locked, a malfunction or
problems may occur.
○ ○ ○
3. Connect the scanner to the computer with the
supplied USB cable.
The computer end of the cable has a wide flat connector while the
scanner end has a small square connector.
wide flat connector
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
USB Interface Cable
N650U/N656U/N1220U Getting Started
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
small square connector
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
15
○
○
○