Canon CanoScan N650U Getting Started page 23

Installation Procedures
○ ○ ○
1. Remove the CanoScan Setup Utility CD-ROM from
the drive once and replace it again.
After a moment, the CanoScan Setup Utility will start and display its
language selection window to allow you to select a language. After
you select a language the following window will automatically display.
If the CanoScan Setup Utility menu window does not display, double-
click the [My Computer] icon, then the CD-ROM icon.
○ ○ ○
2. Click the [Install the Software] button.
The Install Window will display.
If you click the wrong button at any time, click the [Return to the
previous menu] button and reclick the correct item.
A brief description of each program will appear when the cursor rolls
over its name.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
N650U/N656U/N1220U Getting Started
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Menu Window
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
23
○
○