Canon CanoScan N650U Getting Started page 52

ScanGear Toolbox CS Settings
You can make scanning simpler by setting ScanGear Toolbox CS in the
following way. This example shows PhotoStudio 2000 being used
without displaying the ScanGear CS-U window. The scan can be
performed simply by pressing the start button at the front of the scanner.
To Scan without Displaying the ScanGear CS-U Window
1 Click the [Settings] button on the toolbar to display the ScanGear
Toolbox CS Settings dialog.
2 Click the [Custom1] tab.
3 Place a check in the
[Easy Acquire] check
box.
4 Select [Image type],
[Image quality
(Resolution)] and [Paper
size] settings as
required.
5 Click the [OK] button.
This will set a scan to be initiated without displaying the ScanGear CS-U
window when the Custom1 button on the toolbar is pressed. When the
scan is complete, the image will appear in the PhotoStudio 2000 window.
52
N650U/N656U/N1220U Getting Started