Canon CanoScan N650U Getting Started page 35

○ ○ ○ ○ ○ ○ ○
5. Click the [Install the Software] button.
The install window will
display. A brief description
of each program will
appear when the cursor
rolls over its name.
• If you are using the scanner with an unaltered Bondi blue iMac, a
message concerning a Mac OS upgrade and firmware and system
updates will display. Click [Yes] to read more about this topic.
○ ○ ○ ○ ○ ○ ○
6. Click the [Start Installation] button at the bottom
right of the window.
• Although all of the software is being installed in this example,
you may selectively install only the programs you require.
Programs that have the [√] mark removed by clicking them will
not be installed. Please note that Canon Plug-in Module CS-U,
PhotoStudio 2000, CanoScan Toolbox CS are required to operate
the scanner.
• Do not restart the computer or remove the CD-ROM from the
drive while the installation is proceeding unless so directed by a
CanoScan Setup Utility message. These actions would disrupt the
installation.
• Do not perform any other operations during the installation.
• Do not click anything other than the specified buttons or items.
• To install CanoScan Toolbox CS, drag and drop its icon.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
N650U/N656U/N1220U Getting Started
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
35