Operation - ADS-tec opc6115 User Manual

OPC6115/6315

6 Operation

6.1 Front Control Keys
Abb. 4:
Depending on the device equipment version, an operating system (Windows CE.net,
Windows XP embedded or Windows XP Prof.) and a soft keyboard are already installed ex
factory. The keys on the front panel are occupied with the following functions by a specific
driver in the soft keyboard:
Note:
If the software keyboard is not installed, only the functions for display settings
and volume control are active. The controller display will not be output on the
display, in this case.
The key functions can be modified in accordance with customer specific
requirements. Above described functions are pre-set ex works.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 •72622 Nürtingen
Level 1:
Activate and deactivate the soft keyboard for letter/character input
using the touch screen.
Level 2:
Decrease display brightness
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Increase display brightness.
Level 1:
Not connected
Level 2:
The volume can be decreased with devices equipped with an
audio output.
Level 1:
Right mouse-key function.
Level 2:
The volume can be increased with devices equipped with an audio
output.
Shift key (SHIFT) for activating the second keyboard level. This
key must be pressed simultaneously with the desired function key
19