Softkeyboard - ADS-tec opc6115 User Manual

OPC6115/6315

6.2 Softkeyboard

If an operating system is installed ex works, the soft keyboard is also preinstalled. If the operating
system is delivered separately with the device, the soft keyboard must also be installed on site. By using
the soft keyboard, data can be entered via the touch screen like with an external keyboard.
Abb. 6:
How to operate the soft keyboard from version 3.11:
Note:
If a function is to be activated, which requires pressing two keys at the same
time (e.g. Alt + F4), these keys have to be pushed one after another at the
soft keyboard, and the special keys Shift, Alt and Ctrl must always be
pushed first.
Due to differences in programming of a large variety of software, we cannot
ensure that the soft keyboard works properly with all software programmes.
When deactivating the soft keyboard, the previously active state
(alphanumeric / numeric keys or function keys) will be stored and will be
displayed when re-activating the keyboard.
Pos: 22 /Datentechnik/Bedienung/Touch Screen/Touch Screen für VMT 60xx @ 1\mod_1246361069977_6.doc @ 5853 @
© ads-tec GmbH • Heinrich-Hertz-Str. 1 •72622 Nürtingen
Activate and deactivate the soft keyboard for letter/character input
using the touch screen
Switches numeric keys on and off
(only if numeric keys are visible)
Switching between different representations
(Alphanumeric keys  Numeric keys  Function key bar)
Soft keyboard representation, zoom in
Soft keyboard representation, zoom out
21