Usb-Interface - ADS-tec opc6115 User Manual

OPC6115/6315

7.5 USB-Interface

The USB interfaces are used for connecting peripherals with USB connection. These interfaces comply
with the USB 2.0 standard requirements.
Pin-Number
1
2
3
4
Note:
The device supports a maximum of 8 external USB mass storage devices. If
a USB Flash SSD is integrated, a maximum of 7 USB mass storage devices
can be connected.
Note:
The USB interfaces can be individually locked by using the "Lock USB"
software tool.
USB-Interface in Front panel
One USB interface can be accessed from the front. The interface is located under a plastic cover
underneath the display. The cover has a tab on the right-hand side, which is used for opening. The
plastic cover of the USB interface must be returned in protective position after use.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
Signal-Name
VDC
D -
D +
GND
26