Related Manuals for ChimneyFree 23TF10316
Summary of Contents for ChimneyFree 23TF10316
- Page 1 ChimneyFree ™ A Twin-Star International Brand 23TF10316 1-866-661-1218 www.tsicustomerservice.com Twin-Star International, Inc. Delray Beach, FL 33445...
-
Page 2: Table Of Contents
Table of Contents Maximum Load Warning ........... 2 Package Contents .............. 7 Safety Information ............. 3 Assembly ..............8 Warranty ..............5 Operation ..............17 Pre-Assembly ............. 6 FCC/IC Information ............19 Hardware Included ........... 6 Care & Cleaning ............19 Product Specifi cations ............ -
Page 3: Safety Information
Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. If you have any question regarding the product, please call customer service at service at 1-866-661-1218, 8 a.m.-7 p.m., EST, WARNING: Under no circumstances should this fireplace be Monday-Friday, 9 a.m. -
Page 4: Save These Instructions
Safety Information (continued) NOTE: Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver. Never overtighten bolts. • Do not sit on any part of the mantel. NOTE: To avoid injury from unexpected starting or electrical shock, do not plug the power cord into a source of power during unpacking and assembly. -
Page 5: Warranty
Warranty Warranty 1 Year Limited Warranty: The manufacturer warrants that your new Electric Fireplace is free from manufacturing and material defects for a period of one year from date of puchase, subject to the following conditions and limitations. Install and operate this appliance in accordance with the installation and operating instructions furnished with the product at all times. -
Page 6: Pre-Assembly
Pre-Assembly HARDWARE INCLUDED Part Description Part Number Quantity Small Bolt PH-BLTBLK002 Knob (with Screw) Shelf Pin PH-SPNPCSPLB2 Screw PH-SCRBLK001 Flathead Screw Door Hinge Long Screw PH-SCRBLK006 Metal Plate (Pre attached) PH-PLBLK001 Plastic Connector 2 Hole Block PH-PCBBLK001 Plastic Connector 3 Hole Block PH-PCBBLK002 Wood Dowel PH-DWLNTL001... -
Page 7: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS NOTE: All panels are labeled left and right as viewed from the front of unit. Part Description Quantity Left Base Bottom Front Base Right Base Back Base Panel Center Left Side Panel Center Right Side Panel Top Assembly Decorative Front Left Panel Decorative Front Right Panel... -
Page 8: Assembly
Assembly Preparing the back base panel Set the Back Base Panel (D) on a scratch-free surface. Screw the Small Bolts (AA) through the 3-Hole Plastic Connectors (JJ). Assembling the base Align the Right Base (C) and the Left Base (A) with the Bottom Front Base (B) and the Back Base Panel (D). - Page 9 Assembly (continued) Attaching the decorative front panel Preparing the center side panel Set the Center Left Side Panel (E) on a fl at surface. Screw the Small Bolts (AA) through the 2-Hole Plastic Screw the Small Bolts (AA) through the 2-Hole Connectors (II) to attach the Decorative Front Left Panel Plastic Connectors (II) to the Center Left Side Panel (E).
- Page 10 Assembly (continued) Attaching the panels Securing the front panel Screw Small Bolts (AA) through the 2-Hole Plastic To secure the Front Panel (K), loosen pre-attached Metal Connectors (II) to connect the Center Left Side Panel (E) Plate (HH) and turn clockwise. to the Left Base (A).
- Page 11 Assembly (continued) Attaching outside panels Preparing the top assembly Lay the assembled base down on fl at surface. Lay the Top Assembly (G) down on a fl at surface. Insert Wood Dowels (KK) into pre-drilled holes in the Left On the bottom side, attach the Magnetic Catch (NN). Side Panel (L).
- Page 12 Assembly (continued) Attaching back panels Attaching the hinge Stand the assembled unit upright. Set the Left Door (P) on a fl at surface. With the Phillips Screwdriver, insert the Screws (DD) into Using the Phillips Screwdriver, insert the Flathead the pre-drilled holes to attach the Back Panels (O). Screws (EE) through the Door Hinges (FF) to the Left Door (P).
- Page 13 Assembly (continued) Attaching the doors Inserting wine shelves Align the Left Door (P) with the Left Side Panel (L). Insert the Shelf Pins (CC) into the pre-drilled holes. Using the Phillips Screwdriver, insert the Flathead Place the Wine Shelves (R) in and let rest on the Shelf Screws (EE) through the Hinges (FF) to the Left Side Pins (CC).
- Page 14 Assembly (continued) Installing the fi replace insert into the mantel assembly Lift the Fireplace Insert (T) carefully into the back of the unit and center in the fi replace insert opening. Attaching the insert securing block Screw the Small Bolt (AA) through the 2-Hole Plastic Connector (II), previously attached to the Insert Securing Block (S), to the Center Right Side Panel (F).
- Page 15 Assembly (continued) Attaching the insert securing block Insert the 2-Hole Plastic Connector (II) into the pre-drilled hole in the Center Left Side Panel (E). Screw the Small Bolt (AA) through the 2-Hole Plastic Connector (II), to the Center Right Side Panel (F) and the Insert Securing Block (S).
- Page 16 Assembly (continued) Installing the tipping restraint hardware When the Tipping Restraint Hardware (QQ) is properly installed, it can provide protection against unexpected tipping of the Unit due to small tremors, bumps Wall or climbing. Your Unit comes with two Tipping Restraint Hardware (QQ).
-
Page 17: Operation
Operation Operation NOTE: The control panel can be accessed at the upper-right corner of the insert. Powering the fi replace Adjusting the fl ame Push the Power button to supply power to all There are 6 brightness levels that can be selected: functions of the fi replace and put the insert in a standby mode. - Page 18 Operation (continued) Replacing the remote control battery Disposing of used batteries The battery may contain hazardous substances that When the remote control stops operating or its range could endanger the enviroment and human health. seems reduced, it is time to replace the battery with new ones.
-
Page 19: Fcc/Ic Information
FCC/IC Information WARNING: Changes or modifi cations to this unit not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. -
Page 20: Troubleshooting
Troubleshooting PROBLEM ROOT CAUSE CORRECTIVE ACTION Unplug the fi replace, remove the back panel of the fi replace and check that the thermo- The thermostat sensor is stat is plugged into the main circuit board. Display shows " " broken or disconnected. If this does not solve the problem contact customer service for a replacement thermo- stat sensor. - Page 21 Troubleshooting (continued) PROBLEM ROOT CAUSE CORRECTIVE ACTION Flame effect works but heater func- With the power on press and hold the POWER tion does not and the emberbed fl ashes button on the control panel for 10 seconds. The heater is disabled. when the heater button is pressed.
-
Page 22: Replacement Parts
Replacement Parts For replacement parts, call our customer service department at 1-866-661-1218, 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. Part Description Qty. Flame Generator Drive Motor Emberbed Circuit Board Blue Flame Circuit Board Flame Circuit Board Flame Generator/ Spinner Main Circuit Board Heater/Blower Assembly... - Page 23 NOTES REMARQUES NOTAS www.tsicustomerservice.com 1-866-661-1218 Twin-Star International, Inc. Delray Beach, FL 33445 Made in China • Printed in China • Fabricado en China • Impreso en China • Fabriqué en Chine • Imprimé en Chine...
- Page 24 ChimneyFree ™ A Twin-Star International Brand www.tsicustomerservice.com...