ChimneyFree 23TF10316 Manual page 11

Assembly (continued)
9
Attaching outside panels
Lay the assembled base down on fl at surface.
Insert Wood Dowels (KK) into pre-drilled holes in the Left
Side Panel (L).
Push the Left Side Panel (L) and Left Base (A) together.
Using the Phillips Screwdriver, insert the Long Screws
(GG) from underneath the Left Base (A). Turn clockwise
to tighten.
Repeat steps to attach the Right Side Panel (M) to the
Right Base (C).
L
A
KK
GG
11
Attaching the top assembly
Screw Small Bolts (AA) through previously attached
2-Hole Plastic Connectors (II) to the Top
Assembly (G)
M
C
G
10
Preparing the top assembly
Lay the Top Assembly (G) down on a fl at surface.
On the bottom side, attach the Magnetic Catch (NN).
Using the Phillips Screwdriver, insert the Screws (EE) to
secure the Magnetic Catch (NN).
NN
11
EE
G
II AA