Assembly - ChimneyFree 23TF10316 Manual

Assembly

1
Preparing the back base panel
Set the Back Base Panel (D) on a scratch-free surface.
Screw the Small Bolts (AA) through the 3-Hole Plastic
Connectors (JJ).
2
Assembling the base
Align the Right Base (C) and the Left Base
(A) with the Bottom Front Base (B) and the
Back Base Panel (D).
Screw the Flat Washers (MM) and Bolts (LL)
through the pre-drilled holes in the Bottom
Front Base (B) and the Left Base (A).
Screw the Small Bolts (AA) through the
3-Hole Plastic Connector (JJ) already
connected to the Back Base Panel (D).
Repeat to attach the Right Base (C).
MM
LL
AA
JJ
A
8
AA
JJ
D
B
D
C