Assembly (continued)
12
Attaching back panels
Stand the assembled unit upright.
With the Phillips Screwdriver, insert the Screws (DD) into
the pre-drilled holes to attach the Back Panels (O).
DD
O
14
Attaching the knobs
Attach the Knob (BB) to the Left Door (P), by inserting
the screws attached to the Knob (BB) through the
pre-drilled holes. Use the Phillips Screwdriver to tighten
the screws.
Repeat for the Right Door (Q).
13
Attaching the hinge
Set the Left Door (P) on a fl at surface.
Using the Phillips Screwdriver, insert the Flathead
Screws (EE) through the Door Hinges (FF) to the Left
Door (P).
Repeat steps for the Right Door (Q).
O
P
BB
P
12
EE
Q
Q
FF