At+Btfp,N; At+Btsec,Authentication,Encryption; At+Btname=$String; At+Btlpm,N - Sena Parani-SD1000 User Manual

effect the ATZ command must be used or Powercycle the unit.
Reference
AT+BTFP, AT+BTKEY, AT+BTSD?, AT+BTSEC, ATZ, AT&F
B.3.24. AT+BTFP,n
 OK 
Response
Purpose
Set generation of link key every time of c onnection
Parameters n=0: Inactivate (Default)
n=1: Activate
Description If n is set to 1, Parani-SD asks for the pin code every time a c onnection is made. This can
be used to increase security.
Reference
AT+BTCSD, AT+BTKEY, AT+BTSD?, AT+BTSEC, ATD, ATZ, AT&F
B.3.25. AT+BTSEC,Authentication,Encryption
 OK 
Response
Purpose Set authentication and data encryption
Parameters
Authentication=0: Inactivate (Default)
Authentication=1: Activate
Encryption=0: Inactivate (Default)
Encryption=1: Activate
Description
If the authentication is activated, the pin c ode must be set by AT+BTKEY c ommand. Data
encryption cannot be used when authentic ation is not enabled, i.e. Authentic ation=0 and
Encryption=1 will not work properly.
Reference
AT+BTCSD, AT+BTFP, AT+BTSD?, AT+BTSD?, ATZ, AT&F
B.3.26. AT+BTNAME=$string 
 OK 
Response
Purpose Change devi c e name
Parameters $string= New device nam e (Default= "PSDv1.1.3-445566 ")
Description Parani-SD can have a us er friendly name for easy identification. The name allows up to 30
alpha-numeric characters.
Reference AT+BTINFO?, AT+BTINQ?
Example AT+BTNAME="My-Parani -SD "
B.3.27. AT+BTLPM,n 
 OK 
Response
Purpose
Set low power mode
Parameters n=0: Inactivate (Default)
37