Auto Power Disable; Rs232 Pc Serial Interface - Lutron Electronics VC-9200 Operation Manual

6. AUTO POWER OFF DISABLE
The instrument has built-in " Auto Power Off " in
order to prolong battery life. The meter will switch off
automatically if no buttons are pressed for around 10
minutes.
To inactivate this feature by pressing the " Max./Min. "
button ( 4-4, fig. 1 ) to get into the memory record
function during the measurement.

7. RS232 PC SERIAL INTERFACE

The instrument features an RS232 output via 3.5 mm
Terminal ( 4-8, Fig. 1 ).
The connector output is a 16 digit data stream which
can be utilized to the user's specific application.
An RS232 lead with the following connection will
be required to link the instrument with the PC
serial input.
Meter
(3.5 mm jack plug)
Center Pin...................................Pin 2
Ground/shield................................Pin 5
PC
(9W 'D" Connector)
7