Power Management - Lutron Electronics VC-9200 Operation Manual

8 ) For quick measurement, follow the procedures
shown below :
Main procedures :
Connect the " Sensor Plug " to the meter's " Input Socket ".
Power on the meter & select the display unit.
Connect the pressure sensor connector with the equipment.
Apply the equipment and get the pressure value.
Optional measuring procedures :
DATA HOLD

Power management :

AUTO POWER OFF
(Not available during
Memory Record function)
9) Measuring considerations :
The sensor diaphragm can be damaged by solid or
*
sharp objects. Never insert any object into the inlet port.
The vacuum sensor is compatible with industrial gases
*
& liquid that are compatible with ceramic material. To
determine the compatibility of a liquid or gas, refer to
manufacture's specification.
MEMORY RECORD
Max., Min.
or MANUAL POWER OFF
6
RS232 OUTPUT