Rec ( Record ) Function; Auto Power Off Disable - Lutron Electronics SP-82AC Operation Manual

4-8 REC ( Record ) function

1)The REC ( Record ) function can record and display
the maximum and minimum reading values. Start the
Record function by pressing the " REC Button " once.
There will be a " REC " symbol on the display.
2)With the REC symbol on the display :
(a) Press the " REC button " once and the " Max "
symbol along with the maximum value will appear on
the display.
(b) Press the " REC button " again, the " MIN " symbol
along with the minimum value will appear on the display.
(c) To exit the memory record function, press the " REC
button " continuously for at least 2 seconds. The display
will revert to the current reading.
(d) Clear the recorded MAX or MIN value by pressing the
" Hold button " once. Previous recorded
MAX/MIN value will be given up and then revert to the
REC. function keep on recording.

4-9 Auto power off disable

In order to prolong the battery life, the instrument has
"Auto Power Off " function. The meter will switch off
automatically if no buttons are pressed for around 10
minutes.
However if intend disable the " Auto power off " function,
just execute the " REC " function ( above chapter 4-8 ),
then the Auto power off function will be canceled.
9