Ganz ZR-DHC1630NP Gms Manual page 37

[Note]
☞
☞
Print setup
1. Select Start Setup
2. Double-click on [Add a printer ] in
3. Click [Next] in the Add printer wizard.
4. Check to see which [Local printer] is available, select, then click [Next].
5. Click [Disk included] or select printer driver.
6. After the driver has been installed, the print setup is completed.
Image printing
1. When printing, select the monitor size.
If printing is not successful
1. Check the printer setup in Windows.
2. Check to be sure that the printer and power cables are correctly connected.
Printer in Windows.
Print menu.
the
37