Forward-Facing — Convertible Seat - Toyota Mirai 2017 Owner's Manual

4
While pushing
restraint system down into
the rear seat, allow the
shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there
is no slack in the belt, pull the
belt to check that it cannot be
extended.
5
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
■
Forward-facing — Convertible seat
1
If the head restraint interferes
with the child restraint sys-
tem installation and the head
restraint can be removed,
remove the head restraint.
(→P. 145)
2
Place the child restraint sys-
tem on the seat facing the
front of the vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
the child
1-1. For safe use
63
1