146
4-3. Adjusting the seats
Removing the head restraints
■
Pull the head restraint up while pressing
the lock release button.
If the head restraint touches the ceiling,
making the removal difficult, change the
seat height or angle. (→P. 138)
Installing the head restraints
■
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Adjusting the height of the head restraints (front seats)
■
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
Adjusting the rear seat head restraint
■
Always raise the head restraint from the stowed position when using.
WARNING
Head restraint precautions
■
Observe the following precautions regarding the head restraints.
Failure to do so may result in death or serious injury.
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure
●
they are locked in position.
Do not drive with the head restraints removed.
●
Lock
release
button
Lock
release
button