Limitations Of The Pre-Collision System; Handling The Radar Sensor - Toyota Mirai 2017 Owner's Manual

WARNING

Limitations of the pre-collision system

■
The driver is solely responsible for safe driving. Always drive safely, taking
care to observe your surroundings.
Do not use the pre-collision system instead of normal braking operations
under any circumstances. This system will not prevent collisions or lessen
damage or injuries in all cases. Do not overly rely on this system. Failure to
do so may cause an accident, resulting in death or serious injury.
This system has been designed to help avoid and reduce the impact of col-
lisions.
However, the system operates differently depending on the situation
(→P. 240).
As a result, the same level of performance may not be expected in all
cases. Also, the pre-collision brakes may not operate if the driver is
depressing the brake pedal or turning the steering wheel, as the system will
determine such conditions as collision avoidance operations.

Handling the radar sensor

■
Observe the following to ensure the pre-collision system can function effec-
tively.
Otherwise, the system may not function correctly and could result in an
accident.
Keep the sensor and grille cover clean at all times.
●
Clean the sensor and grille cover with a soft cloth so you do not mark or
damage them.
Do not subject the sensor or surrounding area to a strong impact.
●
If the sensor moves even slightly off position, the system may not work
normally or malfunction. If the sensor or surrounding area is subject to a
strong impact, always have the area inspected and adjusted by your
Toyota dealer.
Do not disassemble the sensor.
●
Do not attach accessories or stickers to the sensor, grille cover or sur-
●
rounding area.
Do not modify or paint the sensor and grille cover.
●
If the radar sensor needs to be replaced, contact your Toyota dealer.
●
5-5. Using the driving support systems
243
5