Power Switch; Starting The Fuel Cell System; 5-2. Driving Procedures - Toyota Mirai 2017 Owner's Manual

172

5-2. Driving procedures

Power switch

Performing the following operations when carrying the elec-
tronic key on your person starts the fuel cell system or changes
power switch modes.

Starting the fuel cell system

1
Check that the parking brake is set.
2
Firmly depress the brake pedal.
will be displayed on the multi-information display.
If it is not displayed, the fuel cell system cannot be started.
When shift position N is selected, the fuel cell system cannot start. Select
the P position when starting the fuel cell system. (
3
Press the power switch.
If the "READY" indicator turns on,
the fuel cell system will operate
normally.
Continue depressing the brake
pedal until the "READY" indicator
is illuminated.
The fuel cell system can be started
from any power switch mode.
4
Check that the "READY" indicator is illuminated.
The vehicle will not move when the "READY" indicator is off.
→
P. 180)