Identifying The Parts Of The System Unit - IBM 2193 Hardware Maintenance Manual

Identifying the Parts of the System Unit

This computer system has 3 bays, each bay has an factory-
installed drive in it. The devices are 3.5" Diskette, 40X CD-
ROM drive and 5.0 GB hard disk (some models may have
hard disk of 10 or 15 GB capacity).
Diskette drives in this unit use the standard diskette advanced
technology (AT) Interface. Hard disk and CD-ROM drives in
this unit use an integrated drive electronics (IDE) AT
interface. This computer supports the American National
Standard Institute (ANSI) standard for AT attachment disk
drives and CD-ROMs.
This system has 3 interface cards slots for adapter card
expansion. All of them are Peripheral Component
Interconnect (PCI) interfaces.
All models of this system have a 10/100 Mbps Ethernet port
on board. All models of this system could support DFP
(Digital Flat Panel) function.
103