Supplying The Finisher Unit With Staples - Sharp AR-F15 Service Manual

: Jan. 9 2004
1
6) Return the buffer roller and the buffer roller
cover to their original positions, and close the
upper cover.
Figure 1-306
7) Connect the finisher to the host machine.
Figure 1-307
8) Operate as instructed on the display.
CHAPTER 1 GENERAL DESCRIPTION
B. Supplying the Finisher
Unit with Staples
If the host machine indicates the finisher unit
staple supply message, perform the following to
supply it with staples.
1) Open the front cover.
Figure 1-308
2) Shift down the green lever.
Figure 1-309
3) When the staple cartridge has slightly slid
out, hold and pull it out.
Figure 1-310
1
1-15