Sharp AR-F15 Service Manual page 207

: Jan. 9 2004
1
2) Remove the E-ring [1] and the bearing [2]
on the front side of the knurled belt shaft.
3) Release the pawl [3] on the rear side, and
remove the arm [4].
4) Remove the E-ring [5], the cam [6], and the
gear [7].
5) Remove the parallel pin [8], the plate spring
[9] (with a screw), and the bearing [10].
6) Remove two screws [11], and remove the
knurled belt guide.
CHAPTER 6 MAINTENANCE AND INSPECTION
[2]
[1]
Figure 6-106
[8]
[9]
Figure 6-107
[11]
Figure 6-108
[10]
[7]
[6]
[3]
[4]
[5]
6-5