Sharp AR-F15 Service Manual page 52

CHAPTER 2 FINISHER UNIT BASIC OPERATION
3. Buffer Paper Path 2
This is the paper path when copy sizes shown in Table 2-203 are stacked. A maximum of three
copies (three originals or more in the staple mode) are wrapped round the buffer roller, during
which job offset and stapling are performed on the stapling tray.
Copy size
Typical copy examples
The following shows paper delivery operation in the case of three originals in the staple mode.
1) The first copy is moved in the direction of the buffer roller.
2) The first copy wraps around the buffer roller and, at the same time, the second copy arrives
from the host machine.
2-16
Length 182 to 232mm, and width 182 to 297mm
A4, B5, LT, (excluding transparencies and thick stock)
Table 2-203
Buffer roller
Figure 2-212
Figure 2-213
First copy
First copy
Second copy