Sharp AR-F15 Service Manual page 162

CHAPTER 5 MECHANICAL CONSTRUCTION
5) Disconnect the connector [1], and remove
the two screws [2].
6) Pull out the motor slightly, and remove the
parallel pin [1] and the motor.
9. Removing the Grate-Shaped
Upper Guide
1) Remove the slide guide [1] and end caps
[2].
2) Release the tray lift motor gear clutch [6]
with a screwdriver or similar object while
supporting the tray assembly, and gently
lower the tray assembly down to its lowest
position.
3) Remove the five screws [3] (M4).
4) Remove the screw [4] (M3), and remove
the grate-shaped upper guide [5].
5-6
[1]
Figure 5-113
[1]
Figure 5-114
[2]
[3]
[4]
[6]
Figure 5-115
[2]
[2]
[5] [1]
[3]