Removing Punched Scrap From The Puncher Unit (Option) - Sharp AR-F15 Service Manual

H. Removing Punched Scrap
from the Puncher Unit
(option)
If the display indicates a punched scrap full
state on the puncher unit, perform the following to
remove the punched scrap:
1) Open the front cover of the puncher unit.
Figure 1-355
2) Slide out the punched scrap container.
Figure 1-356
3) Discard the punched scrap.
Figure 1-357
CHAPTER 1 GENERAL DESCRIPTION
4) Return the punched scrap container to its
original position.
Figure 1-358
1-25