Sharp AR-F15 Service Manual page 89

4. Buffer Path Paper Sensor Stationary Jam
The sheet does not move past the buffer path paper sensor when an equivalent of twice the
F15/F16
feeding length of the sheet has been fed after the sensor turned on.
Jam check
Buffer path paper
sensor (PI14)
First feed motor (M1)
5. Delivery Sensor Delay Jam
a. Straight Path
The delivery sensor does not detect paper when an equivalent of 363 mm has been fed after the
F15/F16
inlet sensor turned on.
F15/F16
Jam check
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
Equivalent of size x 2
Normal
Figure 2-260
Equivalent of 363 mm
Normal
Figure 2-261
CHAPTER 2 FINISHER UNIT BASIC OPERATION
Jam check
Buffer path paper
sensor (PI14)
First feed motor (M1)
Jam check
Inlet sensor (PI1)
Delivery sensor (PI3)
First feed motor (M1)
Second feed motor
(M8)
Equivalent of size x 2
Jam
Equivalent of 363 mm
Jam
2-53