Brake Caliper Assembly; Brake Caliper Installation - Yamaha RX10H Service Manual

BRAKE
1. Inspect:
S Caliper piston 1
Scratches/rust/wear ! Replace the caliper
assembly.
S Caliper cylinder 2
Wear/scratches ! Replace the caliper as-
sembly.
S Caliper body 3
Cracks/damage ! Replace.
S Oil delivery passage (caliper body)
Blow out with compressed air.
WARNING
Replace the piston seals and dust seals
whenever a caliper is disassembled.

BRAKE CALIPER ASSEMBLY

WARNING
S All internal parts should be cleaned only
with new brake fluid.
S Internal parts should be lubricated with
brake fluid when installed.
Recommended brake fluid:
DOT 4
S Replace the piston seals and dust seals
whenever a caliper is disassembled.

BRAKE CALIPER INSTALLATION

1. Install:
S Brake hose 1
CAUTION:
When installing the brake hose 1 onto the
brake caliper 2 , make sure that the brake
pipe touches the projection 3 on the brake
caliper.
4-33
POWR
TR