Yamaha RX10H Service Manual page 600

Diagnostic
Item
code
Fuel injection system
relay
50
Radiator fan motor
relay
51
Headlight relay 1
52
58 Odometer
EEPROM fault code
display
60
Malfunction history
code display
61
Malfunction history
code erasure
62
70 Control number
FUEL INJECTION SYSTEM
Description of action
After the engine stop switch has been turned from OFF to ON, it
actuates the fuel injection system relay five times every second
and illuminates the engine trouble warning light (the light is OFF
when the relay is ON, and the light is ON when the relay is OFF).
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
After the engine stop switch has been turned from OFF to ON, it
actuates the radiator fan motor relay five times every 5 seconds
and illuminates the engine trouble warning light.
(ON 2 seconds, OFF 3 seconds)
* If the grip warmer adjustment down side switch is ON, turn it
OFF once, and then turn it back ON.
After the engine stop switch has been turned from OFF to ON, it
actuates the headlight relay five times every 5 seconds and
illuminates the engine trouble warning light.
(ON 2 seconds, OFF 3 seconds)
* If the engine stop switch is ON, turn it OFF once, and then turn
it back ON.
Odometer is displayed on the meter.
• Transmits the abnormal portion of the data in the E2PROM
that has been detected as a self-diagnostic fault code 44.
• If multiple malfunctions have been detected, different codes
are displayed at 2-second intervals, and this process is
repeated.
• Displays the codes of the history of the self-diagnosis
malfunctions (i.e., a code of a malfunction that occurred once
and which has been corrected).
• If multiple malfunctions have been detected, different codes
are displayed at 2-second intervals, and this process is
repeated.
• Displays the total number of codes that are being detected
through self diagnosis and the fault codes in the past history.
• Erases only the history codes when the engine stop switch is
turned from OFF to ON. If the engine stop switch is ON, turn it
OFF once, and then turn it back ON.
• Displays the program control number.
71
FI
Data displayed on meter
(reference value)
Check the fuel injection system
relay operating sound 5 times
with the engine stop switch ON.
Check the radiator fan motor
relay operating sound 5 times
with the engine stop switch ON.
(At that time, the fan motor
rotates.)
Check the headlight relay
operating sound 5 times with
the engine stop switch ON.
(At that time, the headlight turns
ON.)
–
(01 ~ 04) Displays the cylinder
number.
(00) Displays when there is no
malfunction.
11 ~ 85
(00) Displays when there is no
malfunction.
00 ~ 27
(00) Displays when there is no
malfunction.
00 ~ 255