Engine Oil Replacement - Yamaha RX10H Service Manual

ENGINE OIL REPLACEMENT

ENGINE OIL REPLACEMENT
1. Start the engine, warm up for several min-
utes, and then turn it off.
2. Place a containers under the engine oil drain
bolt and oil tank.
3. Remove:
S Bottom panel
S Right side cover
S Oil level gauge coupler
S Oil level gauge/dipstick
S Cylinder head cap
S Oil pan drain bolt 1
S Oil tank drain bolt 2
4. Drain:
S Engine oil
(completely from the oil pan and oil tank)
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
Replacement steps:
a) Remove air box
b) Remove battery
c) Remove battery bracket
d) Then remove oil filter
S Remove the oil filter cartridge 1 with an oil fil-
ter wrench 2 .
NOTE:
When remove the oil filter cartridge, turn the
handlebar to the left.
2-22
INSP
ADJ
Oil filter wrench:
90890-01426, YU-38411