Weight And Physical Dimensions - Brocade Communications Systems SilkWorm 3800 Hardware Reference Manual

A
Product Specifications

Weight and Physical Dimensions

Table A-1
Table A-1
Dimension
Height
Depth
Width
Weight (both power
supplies installed)
Facility Requirements
To ensure correct operation of the switch, the facility where the switch is in use must meet the
following requirements:
•
•
•
•
A-2
lists the weight and dimensions of the SilkWorm 3800.
Physical Specifications
Value
1.72 inches (4.37 cm)
24.5 inches (62.2 cm)
16.9 inches (42.8 cm)
28.0 lbs (12.7 kg)
Electrical:
-
Primary AC Input 100-240 VAC (switch auto-senses input voltage), 47-63 HZ.
-
Adequate supply circuit, line fusing, and wire size, as specified by the electrical
rating on the switch nameplate
-
Circuit protected by a circuit breaker and grounded in accordance with local
electrical codes.
-
The electrical interference must be less than the levels stated in the standards
listed in Table A-4 on page
Thermal:
-
A minimum air flow of 50 cubic feet/minute (35.7 cubic meters/hour) available
in the immediate vicinity of the switch
-
Ambient air temperature must not exceed 40
switch is operating.
Environmental: The specifications listed in
If the switch will be installed in an EIA cabinet:
-
Cabinet space: One rack unit in a 19-inch cabinet
-
All equipment in cabinet grounded through a reliable branch circuit connection
-
Additional weight of switch must not exceed the cabinet's weight limits
-
Cabinet must be secured to insure stability in case of unexpected movement.
A-4, under "Immunity".
°
Celsius (104
Table on page A-3
SilkWorm 3800 Hardware Reference
°
Farenheit) while the