Weight And Physical Dimensions; Facility Requirements; Power Supply Specifications - Brocade Communications Systems 8000 Hardware Reference Manual

A

Weight and physical dimensions

Weight and physical dimensions

Table 6
TABLE 6
Dimension
Height
Depth
Width
Weight (with two power supplies, three fan assemblies,
and no SFPs installed)

Facility requirements

Table 7
TABLE 7
Type
Electrical
Thermal
Cabinet (when
rack-mounted)

Power supply specifications

The power supplies are universal and capable of functioning worldwide without voltage jumpers or
switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply has a built-in fan for
cooling, pushing air towards the port side of the switch.
Table 8
TABLE 8
Specification
Maximum output of one power supply
System DC power consumption (excluding power supply
and fan FRUs)
36
lists the weight and dimensions of the Brocade 8000.
Physical specifications
provides the facilities requirements that must be met for the Brocade 8000.

Facility Requirements

Requirements
•
Primary AC input 100-240 VAC, 2.0A, 47-63 Hz; switch autosenses input voltage
•
Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating
on the switch nameplate
•
Circuit protected by a circuit breaker and grounded in accordance with local electrical
codes
Refer to Table 8 on page 36
•
A minimum air flow of 79.8 cubic meters/hour (47 cubic ft/min.) available in the
immediate vicinity of the switch
•
Ambient air temperature not exceeding 40
•
One rack unit (1U) in a 48.3 cm (19-inch) cabinet
•
All equipment in cabinet grounded through a reliable branch circuit connection
•
Additional weight of switch not to exceed the cabinet's weight limits
•
Cabinet secured to ensure stability in case of unexpected movement
lists the power supply specifications for the Brocade 8000.

Power Supply Specifications

Value
1U or 4.3 cm (1.7 in.)
63.4 cm (25 in.)
42.8 cm (16.8 in.)
12.97 kg (28.6 lb)
for complete power supply specifications.
° °
C (104 F) while the switch is operating
Value
350 watts
Idle: 182.4 W
Maximum: 306 W
Brocade 8000 Hardware Reference Manual
53-1001234-04