Brocade Communications Systems SilkWorm 3800 Hardware Reference Manual page 16

2
Installing and Configuring the SilkWorm 3800
Slide Rack Mount Kit Parts List
Note:
The Slide Rack Mount Kit is compatible with 8, 16, and 32-port SilkWorm switches.
Table 1 Items Supplied with the Slide Rack Mount Kit
Item # Description
Hardware required for installing an 8, 16, or 32-port switch:
1 Assembly, Slide, containing one each of inner slide rail, outer slide rail, and Items 2, 3, 4, below
2 L-Bracket, Slide Mount, 3 hole
3 Nut, Hex, Locking, 8-32 (4 nuts in each slide assembly)
4 Screw, 8-32 x 3/8 inch, Slotted, Zinc (requires a torque of 15 inch-pounds, 17 cm-kgs)
4 nuts in each slide assembly
5 Clip, Power Cord
6 Screw, 10-32 x 3/8 inch, Phillips, Black (requires a torque of 25 inch-pounds, 29 cm-kgs)
7 Screw, 8-32 x 3/16 inch, Phillips, Zinc (requires a torque of 15 inch-pounds, 17 cm-kgs)
6 to attach inner rails to switch; 4 to attach Items 11, 12 to switch
8 Nut, Bar, Rack, 3 hole
Hardware specific to installing a switch in a cabinet that has square-holed rails:
9 Washer, Alignment
10 Nut, Retainer, 10-32
Hardware specific to installing an 8 or 16-port switch to slide out the exhaust-air side of the cabinet:
11 Bracket, Right, Rack Mount (optional bracket for port side)
12 Bracket, Left, Rack Mount (optional bracket for port side)
Hardware specific to installing a 32-port switch to slide out the exhaust-air side of the cabinet:
13 Bracket, Mounting, Right (optional bracket for port side)
14 Bracket, Mounting, Left (optional bracket for port side)
15 Screw, 8-32 x 1/4 inch, Phillips, Zinc (requires a torque of 15 inch-pounds, 17 cm-kgs)
Hardware specific to installing either type of switch to slide out the cool-air side of the cabinet:
16 Bracket, Back Rack Mount (optional bracket for non-port side)
(3) Nut, Hex, Locking, 8-32 (for ends of Item 4 screws)
(4) Screw, 8-32 x 3/8", Slotted, Zinc (requires a torque of 15 inch-pounds)
2-4
Total Qty.
2
4
8
8
6
12
10
4
12
12
1
1
1
1
4
2
4
4
SilkWorm 3800 Hardware Reference