Laser Compliance - Brocade Communications Systems SilkWorm 3800 Hardware Reference Manual

Laser Compliance

This equipment contains class 1 laser products, and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter J and the international laser safety standard IEC 825-2.
Caution
RTC Battery
Warning
Electrical Safety
Warning
Warning
Warning
(Norway only)
Regulatory Certifications
Table A-7
SilkWorm 3800 is certified.
Table A-7 SilkWorm 3800 Regulatory Certifications
Country
Canada
SilkWorm 3800 Hardware Reference
Use only optical transceivers that are qualified by Brocade Communications
Systems and comply with the FDA Class 1 radiation performance
requirements defined in 21CFR Subchapter J, and with IEC 825-1. Optical
products that do not comply with these standards may emit light that is
hazardous to the eyes.
Do not attempt to replace the RTC battery. There is danger of explosion if
the battery is incorrectly replaced or disposed of. Contact your switch
supplier if the clock begins to lose time.
This switch may have more than one power cord. To reduce the risk of electric
shock, disconnect both power cords before servicing.
Connect the power cords only to a grounded outlet.
Apparaten skall an slutas till jordat nattutag.
This product is designed for an IT power system with phase-to-phase voltage
230V. After operation of the protective device, the equipment is still under
voltage if it is connected to an IT power system.
lists the safety and EMC (electromagnetic compatibility) specifications for which the
Safety Specification
CSA 22.2 No. 60950 Third Ed.
Product Specifications
EMC Specification
ICES-003 Class A
A
A-9